Bowflex LateralX LX5 Service Manual page 103

10. Connect the Static Handlebar cables to the new Mast Cables at the
handlebar mount opening. Reinstall the Static Handlebar on the Console
Mast.
NOTICE: Align the clips on the cable connectors and make sure the
connectors lock. Do not crimp the cables.
11. Connect the Console Cables to the new Mast Cables. Reinstall the
Mast Endcap.
NOTICE: Align the clips on the cable connectors and make sure the
connectors lock. Do not crimp the cables.
12. Connect the Mast Cables to the Engine Assembly cables.
NOTICE: Align the clips on the cable connectors and make sure the
connectors lock. Do not crimp the cables.
13. Put the Left Upper Shroud in position. Align the Push Fasteners. Push
the Shrouds together so that the Push Fasteners are fully seated. Using a
#2 Phillips screwdriver, re-install the 3 screws.
Note: Self-tapping screws attach the Shroud to the Frame.
Re-install the Mast Gasket.
103