Bowflex LateralX LX5 Service Manual page 81

Remove the Base Assemblies one at a time and set them safely aside
for reassembly. Set the old Engine Assembly safely aside.
This step requires two people.
Note: It may be helpful to tilt the machine to the side or put a static
order to slide the Base Assemblies off the mount tubes.
upright.
This step requires two people.
Note:
protective sheet from the base mount on top of the Engine assembly. Cut
off the zipties that attach the Engine assembly to the shipping platform.
NOTICE: Do not remove the platform until the Base
Assemblies are attached in order to prevent
81
Ziptie