4. Using a #2 Phillips screwdriver, remove the 3 indicated screws (arrows)
Shrouds at the push fasteners. Remove the Left Shroud and set it safely
aside.
5. Remove the Mast Endcap and set it aside. Disconnect the Mast Cables
from the Console Cables.
NOTICE: Do not crimp the cables. Do not allow the cables to fall down
into the Console Mast.
6. Using a #2 Phillips screwdriver, remove the 4 indicated screws.
Carefully remove the Console. Set the Console and hardware aside for
reassembly.
NOTICE: Hold the Console to make sure that it does not fall. This step
may require two people.
remove the Static Handlebar and disconnect the cables. Set the Static
Handlebar and hardware aside for reassembly.
X2
X4
47
X4