6. Bend the edges of the PCBA cover to disengage the inside tabs from
the mounting plate, and remove the cover from the PCBA Slim Control
Board.
7. Carefully disconnect the Lower Lateral Data Cable from
the PCBA Slim Control Board, noting the location of the
connection for reassembly.
Observe the routing of the Lower Lateral Data Cable to the
base of the Console Mast.
NOTICE: Do not crimp the wires.
8. Disconnect the cables from the Engine Assembly and the Console Mast
cables.
NOTICE: Do not crimp the cables.
88
PCBA
cover
PCBA slim
control board
Lower
lateral
data cable