Bowflex LateralX LX5 Service Manual page 108

X2
Remove the Pedal Arms and Collars. Set them safely aside.
LX3 shown (no Upper Shrouds)
8. Remove the indicated screw and nut:
Note: The hardware is very tight
(factory installed).
LX3/LX3i—Use two 8" or longer
adjustable wrenches (or 24mm or
15/16" socket wrench and 24mm or
Arms toward the front.
LX5/LX5i—Use an 24mm or 15/16" socket wrench (inside of arm) and
24mm or 15/16" open end wrench or adjustable wrench (outside of arm).
Pivot the Adjustable Arms toward the front.
LX5
108