Bowflex LateralX LX5 Service Manual page 55

If you are only replacing the Right Crank arm, go to step 17.
If you are replacing the Left Crank arm, continue to step 15.
15. Using a 17mm open end wrench, loosen and remove the indicated nut
from the Left Lower Shroud. Carefully pull the Power Inlet plug out of the
hole toward the inside of the Shroud.
16. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Left Lower Shroud. Carefully remove the Left Lower Shroud and set it
safely aside.
screws and washers from the Crank and set them safely aside.
55