31. Finger tighten the screw and washer to attach the Mid Pedal Arm.
Using the appropriate tool, tighten the hardware to secure the Mid Pedal
Arm to the Crank.
or
Install the Endcap.
32. Move the Adjustable Arm end into the Mid Pedal Arm bracket. Using a
24mm or 15/16" socket wrench (inside of arm) and 24mm or 15/16" open
end wrench or adjustable wrench (outside of arm), install the indicated
screw and nut. Completely tighten the nut, or torque to 120 Nm (89 ft-lb).
33. Repeat steps 30-32 for the other Mid Pedal Arm.
60