Bowflex LateralX LX5 Service Manual page 135

Disconnect all power to the machine before you service it.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving
these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
NOTICE: Before starting the procedure, make sure that the Resistance
level of the machine is set to zero (0).
Note: It is only necessary to remove parts from the side that you are
replacing.
reference only.
1. Remove the Pivot Bolt Cover from the Right Handlebar Arm. Using a
aside.
the Right Handlebar Arm and Handlebar Link.
Be aware that the Handlebar Arm will be loose and will pivot
when the hardware is removed. Safely allow the Handlebar
Arm to pivot downward and come to rest. Be sure to stay out
of the path of the Handlebar Arm.
3. Remove the Right Handlebar Arm and Wave Washer. Set them safely
aside.
135