Bowflex LateralX LX5 Service Manual page 35

Disconnect all power to the machine before you service it.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving
these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
Note: It is only necessary to remove parts from the side that you are replacing.
Your machine may not match the image. For reference only.
the indicated hardware. Using the Lateral Link Puller tool, remove the
Lateral Links.
Note: Handlebar Arms and Links, Upper Shrouds,
and Console Mast not shown.
2. Using an M24 or 15/16" socket wrench (inside of arm) and 24mm open
end wrench or adjustable wrench (outside of arm), remove the indicated
screw and nut.
Note: The hardware is very tight (factory installed).
Pivot the Adjustable Arm toward the front until it is clear of the Mid Pedal
Arm.
35
X2
X2