Bowflex LateralX LX5 Service Manual page 115

4. Using a #2 Phillips screwdriver, remove the 6 indicated screws
the Shrouds at the push fasteners. Remove the Shrouds and Mast
Gasket, and set them safely aside.
5. Bend the edges of the PCBA cover to disengage the inside tabs from
the mounting plate, and remove the cover from the PCBA Slim Control
Board.
6. Carefully disconnect the indicated wires from the PCBA
Slim Control Board, noting the location of the connections
for reassembly.
X4
X2
Actuator
power
Lower limit
Upper limit switch
switch
115
Actuator
control
Power Inlet
PCBA
cover
Absolute
lateral position
potentiometer
Console
data