Bowflex LateralX LX5 Service Manual page 104

14. Be sure the Handlebar Link is tilted forward. Put the Wave Washer on
the pivot rod.
Be aware that the Handlebar Arms are top heavy, and will
want to pivot when attached onto the Pivot Rod. Be sure to
stay out of the path of the Handlebar.
Align the Handlebar Arm assembly with the pivot rod and attach the lower
Handlebar Arm assembly fully onto the pivot rod and install the hardware
15. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
104