28. Install the Lower Shroud to the Frame Assembly with the screws. Use
a Phillips screwdriver to tighten the screw in position A, then tighten the
screw in position B, and then tighten the screws in the other positions.
A
M4 x 40
M5 x 40
B
29. Using a #2 Phillips screwdriver, re-install the Crank Shrouds.
30. Put the new Mid Pedal Arm on the Crank and push it on by hand,
wiggling it until it goes on as far as possible.
Mid Pedal Arm
59