Bowflex LateralX LX5 Service Manual page 67

13. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Right Lower Shroud. Carefully remove the old Right Lower Shroud
and set it safely aside.
If you are only replacing the Right Drive Belt, go to step 16.
If you are replacing the Left Drive Belt or Flywheel, continue to step
14.
14. Using a 17mm open end wrench, loosen and remove the indicated nut
from the Left Lower Shroud. Carefully pull the Power Inlet plug out of the
hole toward the inside of the Shroud.
15. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Left Lower Shroud. Carefully remove the Left Lower Shroud and set it
safely aside.
If you are only replacing the Left Drive Belt or Flywheel,go to step 18.
If you are replacing the Right Drive Belt, continue to step 16.
67