Displaying Additional Information - Bosch MPC-xxxx-C Series User Manual

Panel Controller
Message number
For information on the message number (#002), see Information about logical zones in the alarm
state, page 43.
Depending on the configuration, additional information is displayed in the second line, such as
the installation location of the detector or the detector type.
To display more information about an alarm message, see Displaying additional information,
page 45.
9.4.8

Displaying additional information

Notice!
By way of example, an action text can be entered for every detector type in the FSP-5000-RPS
programming software.
To display further information about the individual detectors, select the alarm message you
require.
The following information is displayed:
–
–
–
–
–
–
Bosch Sicherheitssysteme GmbH
Element category
Message type
Date and time of the message
Physical and logical addressing of the detector
Only for LSN detectors: specification of the detector type
Action text (depending on the configuration)
User Guide
Alarm | en 45
2017.09 | 7.0 | F.01U.258.929