2. Place a mark 1.75 in. (44 mm) above the original mark you made (or count up three
Attaching rails to the server
Installing and Configuring Avaya Aura
The bottom of each 1-U space is at the middle of the narrowest metal area between
holes (marked with a horizontal line on some rack cabinets).
holes in a rack) and mark the rack's front vertical rails with a felt-tipped pen or
masking tape. If you counted holes, place a mark just above the top hole.
This mark or piece of tape indicates where the system's upper edge will be located
on the vertical rails.
™
System Platform
Installing and connecting the S8510 Server
April 2010
27