Attaching Rails To The Rack - Avaya Aura System Platform Installing And Configuring

Server installation and connectivity
#
3 Verify that the rack is grounded in
accordance with local electrical
code.
4 Remove the cabinet doors, if
necessary.
7

Attaching rails to the rack

page 32
8 Installing the server in the rack
page 34
Install the cable management
arm
9 Replace the cabinet doors, if
necessary.
10 Turning on the server
page 36
11 Troubleshoot the installation.
Attaching rails to the rack
Prerequisites
If the slide rails in your rack installation kit came with thumbscrews installed, remove them
before you begin the following installation procedure.
Each slide rail is marked with either an R (right) or an L (left).
1. Select one of the slide rails and push up on the front moveable tab (1). See the
32 Installing and Configuring Avaya Aura
Task
on
(optional)
on
following figure.
™
System Platform
Notes
See Approved Grounds (555–245–772),
available at http://support.avaya.com.
See the cabinet manufacturer's
documentation.
on
See the cabinet manufacturer's
documentation.
April 2010