Configuring Network Settings For Console Domain - Avaya Aura System Platform Installing And Configuring

Installing System Platform using laptop
Next steps
Configure network settings for Console Domain.
System Domain Network Configuration field descriptions
Names
Hostname
Primary DNS
Secondary DNS
Physical Devices eth0 and eth1
Static IP
Subnet Mask
Default gateway
IP

Configuring network settings for Console Domain

1. On the System Platform Console Domain Network Configuration screen, complete
52 Installing and Configuring Avaya Aura
Descriptions
The host name for System Domain (Dom-0). This must be a fully
qualified domain name (FQDN).
The primary DNS server address.
(Optional) The secondary DNS server address.
These are the physical Ethernet interfaces (NICs) on the server. You
must configure these interfaces for IP.
The static IP address for the eth0 option.
The subnet mask address for the Ethernet interface.
You can modify the default value of Subnet Mask, if required. The
default value is 255.255.255.0.
The default gateway IP address for each Ethernet interface.
This default gateway IP address will be used for all the virtual
machines, if you do not specify gateway IP addresses for them.
Note:
Although you can enter default gateway for each interface, you
should specify only one default gateway. Specifying more than one
default gateway may result in an unusable internal networking
configuration.
the following fields to set up the console domain network:
• Hostname
• Static IP
™
System Platform April 2010