Formatting A Usb Drive - Avaya Aura System Platform Installing And Configuring

Formatting a USB drive

1. Insert your USB drive and note the assigned device (typically /dev/sdb) by typing
2. Run the command fdisk on the device.
3. Enter m to get a list of commands.
4. If required, type d to delete a partition on the USB drive.
5. If required, type p to print the USB drive information.
Installing and Configuring Avaya Aura
dmesg.
The system displays output similar to the one shown below:
The system displays output similar to the one shown below:
The system displays output similar to the one shown below:
™
System Platform
Formatting a USB drive
April 2010 89