Avaya Aura System Platform Installing And Configuring page 76

Installing a solution template
3. Select a location from the list in the Install Templates From box. See
4. Click Search to display a list of template descriptor files (each available template
5. On the Select Template page, click the required template, and then click Select to
6. Click Install to start the template installation.
76 Installing and Configuring Avaya Aura
Important:
System Platform creates an internal, private bridge that allows virtual machines
to communicate with each other. This private bridge does not have any
connection to your LAN. During installation, System Platform runs an algorithm
to find a set of IP addresses that do not conflict with the addresses configured on
the System Domain Network Configuration screen. However, it is still possible
that the addresses selected conflict with other addresses in your network. Since
this private bridge is not connected to your LAN, this address conflict could result
in the failure of System Platform or an installed template to route packets
correctly.
Before installing a template, check the Network Configuration page on the
System Platform Management console (Server Management > Network
Configuration) to view the addresses allocated on the bridge named "avprivate".
Keep in mind that the template you install may take additional addresses on the
private bridge. The range of addresses start with System Domain's (Dom-0)
interface on "avprivate".
and Remote Template field descriptions
available location options.
(Optional) If the template installation files are located in a different server (for
example, Avaya PLDS or HTTP), you may be required to configure a proxy
depending on your network.
has exactly one template descriptor file).
continue.
The system displays the Template Details page with information on the selected
template and its Virtual Appliances.
™
System Platform
on page 77 for more information on the
Search Local
April 2010