Attaching The Rails To The Rack - Avaya S8800 Installing

1 Cable-management arm stop bracket (1)
2 Cable-management arm assembly
3 Slide rail (left)
4 Slide rail (right)
5 Large cable tie (1)
6 Cable ties (5)
7 M6 screws (4)
8 10–32 screws (2)
9 Cable-management support arm
10 Front of rails
11 Cable-management arm mounting bracket (1)

Attaching the rails to the rack

Prerequisites
If the slide rails in your rack installation kit came with thumbscrews installed, remove them
before you begin the following installation procedure.
Each slide rail is marked with either an R (right) or an L (left).
Installing the Avaya S8800 Server for Avaya Aura Collaboration Server
®
Installing the Avaya S8800 Server
December 2010 17