Setting Up A Usb Drive - Avaya Aura System Platform Installing And Configuring

Using USB drive for System Platform installation
13. Format the USB drive by typing the command mkfs -t vfat /dev/sdb1.

Setting up a USB drive

Prerequisites
The user is logged in as root and is currently in the /root directory.
Note:
If you are not familiar with Linux commands, Avaya recommends that you install System
Platform using a DVD.
1. Create a directory for the System Platform build by typing the following command:
2. Copy the ISO image to this directory.
3. Create a directory in sp-builds for temporarily mounting the ISO image by typing
4. Mount the ISO image on your system by typing the following command:
5. Type the following command to copy the mounted directory (and the ISO image )
92 Installing and Configuring Avaya Aura
The system displays output similar to the one shown below:
mkdir /root/sp-builds
Note:
In this example, the directory /root/sp-builds is created and used.
the command mkdir /root/sp-builds/isotemp.
mount -o loop /root/sp-builds/vsp-1.1.0.0.10.iso /root/sp-
builds/isotemp
to another directory for running the script.
cp -r /root/sp-builds/isotemp /root/sp-builds/isocopy
™
System Platform April 2010