Using USB drive for System Platform installation
6. Create a new primary partition by typing n
7. Verify the partition information by typing p.
8. Change the partition type from default of Linux to W95 FAT32 by typing t.
90
Installing and Configuring Avaya Aura
The system displays output similar to the one shown below:
Select primary partition by typing p.
Give partition number l.
Accept the defaults for the cylinder information (the partition takes up the whole
drive space.)
The system displays output similar to the one shown below:
The system displays output similar to the one shown below:
Give partition number l.
Type partition type L to list the partition type codes.
Type b as the required partition type code.
™
System Platform
April 2010