Connecting To Server And Network - Avaya Aura System Platform Installing And Configuring

Next steps
See the specific product documentation for information on installing the operating system and
software.

Connecting to server and network

Perform the following tasks to connect to the server and to the network:
Front of server
1 Hard disk drive activity LED (green)
2 Hard disk drive status LED (amber)
3 Drive bay 0
4 Drive bay 2
Installing and Configuring Avaya Aura
• Connect a monitor and a keyboard to the server, use the video connector and
USB port in the server. See the Front view of server topic.
• Connect the server to the customer's network, connect the cable to Ethernet
connector port (eth0, which is labelled as port 1). See the Back view of server
topic.
• Connect the server for High Availability Failover, connect the eth cables to eth2,
which is labelled as port 3 on the server. For High Availability, both the servers
must be in close proximity, approximately 10 meters.
™
System Platform
Installing and connecting the S8800 Server
April 2010 37