Nortel 1000E Upgrade page 69

Installing a DSP Daughterboard
Table 12
DSP Daughterboard configurations
Position 1 (DB1)
DB32 (card slot 11)
None
DB32 (card slot 11)
DB96 (card slot 11, 12 &13)
DB96 (card slot 11, 12 &13)
Communication Server 1000E Upgrade
3 Remove the SSC card from its slot.
The SSC card should be preserved for a minimum of five
days.
It is illegal to continue to run the system software on the
existing SSC card. Please DESTROY or RETURN the
SSC dongle to your local Nortel Repairs/Returns center.
No further orders will be accepted for the serial number
since it will be decommissioned and tracked in Nortel's
database.
Table 12 lists the configuration options for Position 1 and 2.
The following procedure describes how to install a DSP Daughterboard on an
MGC card. See Figure 7.
Installing CS 1000E hardware
IMPORTANT!
End of Procedure
Position 2 (DB2)
None
DB32 (card slot 0)
DB32 (card slot 0)
None
DB32 (card slot 0)
Option 11C Chassis to Communication Server 1000E
Page 69 of 228