Nortel 1000E Upgrade page 129

Figure 55
ELAN connection on Ethernet port coupler
Communication Server 1000E Upgrade
9 Connect the server to the TLAN subnet.
a. Insert one end of the remaining RJ-45 CAT5 Ethernet patch cable
(supplied) into the TLAN network interface (TLAN port) on the
faceplate of the server.
b. Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c. Plug the other end of the Ethernet patch cable into the remaining
Ethernet port coupler mounted in the Ethernet port adapter plate.
d. Label the Ethernet port coupler as TLAN.
Installing a Signaling Server
Option 11C Chassis to Communication Server 1000E
Page 129 of 228