Nortel 1000E Upgrade page 122

Page 122 of 228
NN43041-465 Standard 01.04
Installing a Signaling Server
Procedure 13
Installing ELAN and TLAN Ethernet ports on the back of a CS 1000M
UEM
1 Obtain the special cabling kit (NTDW69AAE5) shipped with the CS
1000M model of the Nortel CP PM Signaling Server (NTDW66AAE5). The
NTDW69AAE5 cabling kit should include the items shown in Figure 47.
Figure 47
NTDW69AAE5 Cabling Kit contents
The following is a list of items in the NTDW69AAE5 cabling kit:
• two RJ-45 CAT5 Ethernet patch cables
• two Ethernet port couplers
• one Ethernet port adapter plate
• two screws
• two nuts
• two washers
• two ferrite beads
2 Insert an Ethernet port coupler into the adapter plate. See Figure 48.
July 2007