Nortel 1000E Upgrade page 38

Page 38 of 228
Tone Receiver Conversion
Table 6
Tone receiver conversion (Part 1 of 2)
CS 1000S/M
Slot
0 0-7
0 8-11 or 8-15
NN43041-465 Standard 01.04
Ports on the SSC card
Only the TTY ports from the SSC cards in the small system are converted
while the other TTY ports (for example, TTYs from the SDI card) are deleted.
Tone receivers are converted using the same algorithm as that used for IPE
shelf conversion. The tone receivers map to cards 14 and 15 for each of the
five IPMGs (see Table 6 on
If units 8-11 in the SSCs have MFC, MFE, MFK units provisioned, then these
units are provisioned in units 0-3. If these units (8-15) were provisioned as
DTRs in the SSC, then these units are provisioned as DTRs in units 0-7.
Note: On CS1000S systems, any DTRs converted to Media Gateway 00
0, will need to be removed unless appropriate hardware is added.
Additional DTRs will need to be programmed in the configured Media
Gateways.
Unit Superloop
0
0
July 2007
(†)
page 38).
CS 1000E CP PM
Shelf
0 14
0 15
Card Unit
0-7
0-3 or 0-7