Entering basic system parameters
Figure 100
Install Tool banner screen
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
#####
#########
########`` `#############
########
#######`
#######
#######
####### #####`
`#########`
#######`
`#######
##########
##``##########
##
`########################
`#
`########################
###########################``
`````````
Please press <CR> when ready ...
Communication Server 1000E Upgrade
–
Primary and Alternate NRS IP addresses for this networked
system. Refer to IP Peer Networking: Installation and
Commissioning (NN43001-313)
–
NRS role, if applicable. Refer to IP Peer Networking:
Installation and Commissioning (NN43001-313)
Procedure 22
Entering basic system configuration parameters
1
Press the RST button on the faceplate of the CP PM Signaling Server.
This cold-reboots the Signaling Server and triggers the Install Tool on the
hard drive (see Figure 100)
########
``
`#############
######```####
######``
#####``
#####'
`###`
````####````
Installing a Signaling Server
`###
####
#### Communication Server 1000 Software
####`
#####
Copyright 2002 – 2006
#
<CR>
Option 11C Chassis to Communication Server 1000E
NORTEL NETWORKS
Page 181 of 228