Nortel 1000E Upgrade page 204
Option 11c chassis upgrade
Hide thumbs
Also See for 1000E:
- Installation and configuration manual (490 pages) ,
- Maintenance manual (222 pages) ,
- Regulatory and safety information (2 pages)
Table of Contents
Advertisement
Page 204 of 228
Figure 120
Add IPMG
NN43041-465
Standard 01.04
Configuring the IPMG
Procedure 26
Configuring the IPMG (Element Manager)
1
In Element Manager, select IP Network > Media Gateways. Select the
appropriate Superloop Number and Shelf. Click Add.
2
The preceding screen appears (see Figure 120). Enter the IP address,
zone number, and the Media Gateway type (in this case, a Media
Gateway Controller). Selecting "MGC" automatically fills in the remaining
fields ("CE", "E1", "E", "CT", "T2", and "T"). Click Submit.
Note: The IP address entered here is the same IP address as the one
configured on the MGC in an earlier procedure.
The following screen appears (Figure 121 on
3
Enter the Gateway IP addresses and Voice LAN IP addresses. If the MGC
has DSP daughterboards connected, select the type and enter the IP
addresses.
July 2007
page
205):
Advertisement
Chapters
Table of Contents
