Nortel 1000E Upgrade page 136

Page 136 of 228
NN43041-465 Standard 01.04
Installing a Signaling Server
3 Align the screw holes in the rack-mount rail to the mating holes in the side
of the ISP1100 Signaling Server chassis. Use three screws (C) on each
side.
Note: Hand-tighten the screws to prevent cross-threading, then use a
Phillips screwdriver to secure them.
4 Attach the bezel door to the faceplate of the Signaling Server, as shown
in Figure 62 and Figure 63 on
Figure 62
Left hinge mount
July 2007
page 137.