Rebooting The Mgc - Nortel 1000E Upgrade

Page 112 of 228

Rebooting the MGC

NN43041-465 Standard 01.04
Installing the software
Do you want to continue? (y/n/[a]bort) : y
reboot(-1) has been called...
Following the reboot, the MGC connects to the CS and downloads the
remaining configuration information.
If centralized software upgrade has been enabled, the MGC will upgrade its
loadware by downloading it from the CS.
Once the MGC has registered, the LED display will show the superloop and
shelf (for example: 4 0) of the IPMG. Otherwise, it will show "UNRG."
The MGC reboots and registers with the Call Server.
Found device : INTEL 82365SL
Engcode:NTDW60BA REL 08
ELAN mac address is:00:13:65:ff:ee:ed
TLAN mac address is:00:13:65:ff:ee:ec
RESET reason: Hard Reset.
Daughter board 1:NTDW62AA R02
Daughter board 2:NOT INS
Copyright 1984-2005
CPU: Chagall
Version: VxWorks5.5.1
Bootcode version: MGCBAA20
auto-booting...
Loading MSP from CF...1375736
Booting ARM0 (MSP) at 0x00000100 ...
Loading CSP from CF...6643712 + 5849088
Booting ARM1 (CSP) at 0x80010000 ...
Found device : INTEL 82365SL
Loading symbol table from /p/mainos.sym ...done
July 2007
00:13:65:ff:f8:fd.
VxWorks System Boot
Wind River Systems, Inc.