Nortel 1000E Upgrade page 175

Figure 94
Primary NRS IP address
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please enter the Primary NRS IP Address:
Primary NRS IP
Figure 95
Alternate NRS IP address
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please enter the Alternate NRS IP Address:
Alternate NRS IP :
Communication Server 1000E Upgrade
TLAN subnet parameters as required. The Call Server IP address is
automatically set to 0.0.0.0.
Depending on whether the Signaling Server is configured as Primary,
Alternate, or Standalone, either the Primary NRS IP address screen,
the Alternate NRS IP address screen, or both (in succession) appear.
Both screens appear in succession for a Standalone Signaling
Server.
:
15 Enter the Primary NRS IP address or the Alternate NRS IP address,
depending on the option entered in step 12 on
page 172.
• If a was entered in step 13, you can enter the address of the Alternate
NRS if you know it, but it is not required. See.
• If b was entered in step 13, enter the address of the Primary NRS.
• If c was entered in step 13:
— Enter the address of the Primary NRS.
— Enter the address of the Alternate NRS.
• If d was entered in step 12:
Installing a Signaling Server
Option 11C Chassis to Communication Server 1000E
Page 175 of 228
page 171 or step 13 on