8. Remove the cable of the Connector Holder [1].
• 2 Snap bands [2]
• 2 Claws [2]
9. Disconnect the connector [2] from the Connector Holder [1].
• 1 Connector [2]
10. Remove the Fixing Film Unit [1].
Removing the Pressure Roller
■ Preparation
1. Remove the Fixing Film
[1]
1x
Unit."Removing the Fixing Film Unit" on page 268
1x
2x
[2]
[3]
[2]
[1]
273
4. Disassembly/Assembly
[1]