Canon imageRUNNER ADVANCE 4551i Service Manual page 818

COPIER > OPTION > LCNS-TR
ST-LIPS5 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-LIPS5 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-LIPS4 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-LIPS4 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-PSPCL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Install state dspl:LIPS LX/LIPS4 func:JP
To display installation state of LIPS LX/LIPS4 function (JP only) when disabling and then
transferring the license.
When checking whether LIPS LX/LIPS4 function (JP only) is installed
1) Select ST-LIPS5.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-LIPS5.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns key dspl:LIPS LX/LIPS4 func:JP
To display transfer license key to use LIPS LX/LIPS4 function (JP only) when disabling and then
transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-LIPS5.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-LIPS5.
24 digits
Install state display of LIPS4 func: JP
To display installation state of LIPS4 function (JP only) when disabling and then transferring the
license.
When checking whether LIPS4 function (JP only) is installed
1) Select ST-LIPS4.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-LIPS4.
When operation finished normally: OK!
According to the setting at shipment
Trns license key dspl of LIPS4 func: JP
To display transfer license key to use LIPS4 function (JP only) when disabling and then transferring
the license.
- When replacing HDD
- When replacing the device
1) Select ST-LIPS4.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-LIPS4.
24 digits
Install state dspl of PS/PCL function
To display installation state of PS/PCL function when disabling and then transferring the license.
When checking whether PS/PCL function is installed
1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PSPCL.
When operation finished normally: OK!
According to the setting at shipment
805
8. Service Mode