Canon imageRUNNER ADVANCE 4551i Service Manual page 808

COPIER > OPTION > ACC
SRL-SPSW 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
PDL-THR 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
CR-TYPE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
MEAP-SRL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Setting of Serial I/F Kit support
To set the support level of the Serial Interface Kit.
To keep processing performance of printer engine, select "1: Priority on speed".
To correctly stop the output by the upper limit number of sheets, select "2: Priority on upper limit
number of sheets".
At installation of Serial Interface Kit
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
With priority on speed, output cannot be correctly stopped by the upper limit number of sheets.
With priority on the upper limit number of sheets, processing performance of the printer engine is
decreased depending on pickup location.
0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number of sheets
0
Norm PDL pnt set:External charge mode6/7
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set normal PDL print job processing at external charge mode 6/7.
When 1 is set and external charge mode 6/7 is set with COIN, normal PDL print job is executed
without being cancelled.
When setting the normal PDL print processing in external charge mode 6/7
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Cancel, 1: Execute
0
COPIER> OPTION> ACC> COIN
Setting of Card Reader
To set the model of the Card Reader.
Set 1 in the case of connecting the Card Reader-C1. It operates even 0 is set, but recognition rate
decreases.
When connecting the Card Reader-C1
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Card Reader-F1, 1: Card Reader-C1
0
Set to allow serial comctn from MEAP app
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow serial communication of MEAP application.
When 1 is set, serial communication of the machine is stopped and only the serial communication
with MEAP application is available.
When performing serial communication from MEAP application
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Prohibited, 1: Allowed
0
795
8. Service Mode