Canon imageRUNNER ADVANCE 4551i Service Manual page 734

COPIER > OPTION > FNC-SW
PSWD-SW
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SM-PSWD
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
RPT2SIDE
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
INVALPDL
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
1 Password type set to enter service mode
To set the type of password that is required to enter when getting into service mode.
2 types are available: one for "service technician" and the other for "system administrator + service
technician".
When selecting the type for "system administrator + service technician", enter the password for
service technician after the password entry by the user's system administrator.
Upon request from the user who concerns security
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: No password, 1: Service technician, 2: System administrator + service technician
0
2 Password setting for service technician
To set password for service technician that is used when getting into service mode.
When password is required to get into service mode
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Be sure to select 1 or 2 with PSWD-SW in advance.
1 to 99999999
11111111
COPIER> OPTION> FNC-SW> PSWD-SW
1 Set of report 1-sided/2-sided output
To set whether to use 1-sided or 2-sided for report output of service mode.
When making 1-sided report output
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: 1-sided, 1: 2-sided
1
COPIER> FUNCTION> MISC-P> P-PRINT
1 Disable of PDL license
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To disable the registered PDL license.
When "1: Disabled" is set, PDL is disabled even if a PDL license is registered. This is set to the
machines installed at convenience stores, which do not allow PDL to be used.
When prohibiting the use of PDL
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Registered PDL license is enabled, 1: Disabled
0
721
8. Service Mode