4
Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit / Pressure Roller Unit > Procedure
2) Hold the 2 Release Levers [1] of the Fixing Assembly, and remove the Fixing Assembly [2].
[1]
NOTE: How to install the Fixing Assembly
Be sure to push the Release Lever [A] of the Fixing Assembly with your finger until it
locks.
[A]
NOTE: Actions after assembly
Execute Correct Print Color Mismatch.
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Correct Print
Color Mismatch
4
Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit / Pressure Roller Unit > Procedure
[1]
[2]
F-4-347
[A]
F-4-348
Removing the Fixing Film Unit / Pressure Roller Unit
■ Preparation
1) Remove the Fixing Assembly.
■ Procedure
1) Remove the Fixing Assembly Cover [1].
• 2 Screws [2]
2x
F-4-349
[2]
[1]
F-4-350
4-138
4-138