5. When replacing the Stamper with a new one, clear the parts counter.
• COPIER > COUNTER > DRBL-2 > STAMP
■ Removing the Left Hinge
● Preparation
1. Removing the Rear
Cover."Removing the Rear Cover" on page 226
2. Remove the ADF from the host
● Procedure
1. Open the Feeder cover [1].
2. Remove the Left hinge [1].
• 6 Screws [2]
CAUTION:
Be careful not to drop the Left hinge. Hold it while removing the screws from it.
3. When replacing the Left hinge with a new one, clear the parts counter.
• COPIER > COUNTER > DRBL-2 > DF-HNG-L
machine."Removing this Machine from the Host Machine" on page 219
[1]
[2]
6x
[2]
[1]
[2]
224
4. Disassembly/Assembly
[2]