Overview; Location Code; Pickup Position Code - Canon imageRUNNER ADVANCE 4551i Service Manual

Overview

This section describes the error codes that are displayed when failure has occurred. The codes are divided into three categories.
Code types
Error Codes This code is displayed when a failure caused by the host machine
has occurred.
Jam code This code is displayed when a jam occurs inside the machine.
Alarm code This code is displayed when some functions are disabled.
Display of error codes
The 7-digit "E000XXX"error code is displayed on the display of the Control Panel. However, since "000" of the 2nd to 4th digits
is not used, the 5th to 7th digits are described as "EXXX" in the Service Manual. (Example: E012 -> E000012)

Location Code

The error codes, jam codes, and alarm codes of this machine contain information on the location.
The location is displayed in 2 digits and has the meaning shown below: (In the jam display screen, the "L" row corresponds to
the location code.)
Host machine
Reader/ADF
Cassette Feeding Unit-AN1
High Capacity Cassette Feeding Unit-B1
Paper Deck Unit-F1
Buffer Pass Unit-N1
Booklet Finisher-Y1 / Staple Finisher-Y1
Inner Finisher-J1
2/3 Hole Puncher Unit-A1
2/4 Hole Puncher Unit-A1
4 Hole Puncher Unit-A1
Inner 2/F4 Hole Puncher-C1
Inner 2/3 Hole Puncher-C1
Inner S4 Hole Puncher-C1
FAX Board

Pickup Position Code

When jam occurs, pickup location is indicated with the following pickup position code. (In the jam display screen, the "P" row
corresponds to the pickup position code.)
At Finisher jam/At error avoidance jam/At ADF jam without pickup operation (at SEND, BOX, etc.)
Cassette 1
Cassette 2
Cassette 3 (Cassette Feeding Unit-AN1 / High Capacity Cassette Feeding Unit-B1)
Cassette 4 (Cassette Feeding Unit-AN1)
Multi-purpose Tray Pickup Assembly
Side Paper Deck
Duplex (At duplex printing, jam occurs after paper passes through the Duplex Feed Sensor (S7).)
Description
Device
Pickup position
"Error Code" on page 383
"Jam Code" on page 509
"Alarm Code" on page 520
JAM
00 Main Controller: 00
Printer engine: 05
01 04
00 05
00 05
00 05
02 02
02 02
02 02
02 02
02 02
- 07
380
7. Error/Jam/Alarm
Reference
ERR ALARM
Other than
those below
02, 50
04
04
04
-
61
61
65
65
-
Pickup position code
00
01
02
03
04
05
06
F0