Canon imageRUNNER ADVANCE 4551i Service Manual page 806

COPIER > OPTION > ACC
DK-P 1
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CARD-SW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
CC-SPSW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
UNIT-PRC 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
IN-TRAY 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Setting of Paper Deck paper size
To set the paper size used in the Paper Deck.
Enter the setting value, and then press OK key.
0 to 2
0: A4, 1: B5, 2: LTR
0
Screen set when Coin Manager connected
To set coin or card that the user is prompted to insert on the Control Panel when the Coin Manager
is connected.
When 1 is set, authentication operation using the Coin Manager is also required.
Upon user's request
Enter the setting value, and then press OK key.
0 to 3
0 and 3: Card, 1: Card + authentication, 2: Coin/Card
Support setting of control card I/F
To set support level for control card (CCIV/CCV) interface.
Upon user's request (when connecting to the external counter management system using the
control card interface)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: No support, 1: Support
0
Setting of Coin Manager currency unit
To set currency unit to be handled with Coin Manager
At installation of Coin Manager
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 6
0: Japanese yen, 1: Euro, 2: Pound, 3: Swiss Franc, 4: Dollar, 5: No currency unit (no fractional
unit), 6: No currency unit (with fractional unit)
0
Presence/absence of Inner 2-way Tray
To set whether the Inner 2-way Tray is installed or not.
When it is installed, set 1.
When installing the Inner 2-way Tray
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Not installed, 1: Installed
0
793
8. Service Mode