Points to Note before Installation
When installing the machine, beware the following points.
1. When tightening the screws, do not tighten them too tightly. Otherwise, there is a risk of damage and deformation of screw
holes.
2. When the machine is moved from a cold location to a warm location, condensation may occur resulting in water drops on
the metal surfaces. Use of the host machine when there is condensation may result in image failure. After moving the machine
from a cold location to a warm location, leave it unpacked for at least 2 hours or more to let it warm up to room temperature
before installation.
3. The maximum weight of the machine is approx. 78kg. Be sure to perform the work in accordance with the standard to handle
a heavy load in each country. In addition, be sure to keep the machine leveled when lifting it.
875
9. Installation