Canon imageRUNNER ADVANCE 4551i Service Manual page 723

COPIER > FUNCTION > CLEAR
DK-RCV
Detail
Use Case
Adj/Set/Operate Method
CUSTOM2
■ MISC-R
COPIER > FUNCTION > MISC-R
SCANLAMP
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
SCANLMP2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
RD-SHPOS
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
■ MISC-P
COPIER > FUNCTION > MISC-P
P-PRINT
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
HIST-PRT
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
1 Clearing of deck alarm
To clear the descent timeout alarm (04-1537) occurred in the Paper Deck.
At recovery from descent timeout alarm
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
2 [For customization]
1 Lighting check of Scanner Unit (frt) LED
To light up the Scanning Lamp for 3 seconds under the White Plate and the Copyboard Glass
respectively.
When replacing the LED of the Scanner Unit
Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
1 Lighting check of Scanner Unit (bck) LED
To light up the LED of the Scanner Unit (for back side) for 3 sec.
Check whether there is a missing block or no lighting in LED.
When replacing the LED of the Scanner Unit
Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
2 Moving to Reader Scanner Unit fix pstn
To move the Reader Scanner Unit to the position where it is secured in when moving.
When moving the Reader after installation, the Reader Scanner Unit may move and get damage.
By moving the Scanner Unit to the specified position and securing it in place with a screw before
moving, damage can be prevented.
When moving the Reader after installation
Select the item, and then press OK key.
Be sure to move the Scanner Unit to the fixing position and secure it in place with a screw when
moving the Reader after installation. Otherwise, the Scanner Unit may get damage.
During operation: ACTIVE, When operation finished normally: OK!
1 Output of service mode setting value
To print the service mode setting value.
Before executing the CLEAR service mode, etc.
Select the item, and then press OK key.
Be sure to use A4/LTR size plain paper/recycled paper.
COPIER> FUNCTION> MISC-P> RPT-FILE
1 Output of jam and error history
To print the jam history and error history.
When printing the jam/error history
Select the item, and then press OK key.
Be sure to use A4/LTR size plain paper/recycled paper.
COPIER> FUNCTION> MISC-P> RPT-FILE
710
8. Service Mode