Canon imageRUNNER ADVANCE 4551i Service Manual page 933

NFC Kit-C1
Points to Note at Installation
• Do not touch the sensor and PCB components of the
Control Panel.
• The parts removed in "Removing the Control Panel" will
be used in "Installing the Control Panel".
• Although pictures or illustrations used for explanation
may differ from the actual things, the procedure is the
same.
Checking the Contents
1x
1x
1x
<Others>
• Guides are included
Check Item When Turning OFF
the Main Power
Check that the main power is OFF.
1. Turn OFF the main power switch.
2. Check that the display in the Control Panel and the
lamp of the main power are turned off, and then
disconnect the power plug.
1x
1x
TP; M3x4
1x
920
Installation Outline Drawing
Remove the Control Panel
NOTE:
The removed parts will be used in "Installing the Control
Panel".
1.
2.
2x
9. Installation