Canon imageRUNNER ADVANCE 4551i Service Manual page 623

COPIER > DISPLAY > VERSION
MOBIL-ZH 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
■ USER
COPIER > DISPLAY > USER
SPDTYPE 1
Detail
Use Case
Adj/Set/Operate Method
ADFTYPE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
RCON-PCB 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
DL-RCON 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Supplement/Memo
■ ACC-STS
COPIER > DISPLAY > ACC-STS
FEEDER 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Display of MPA Chinese file ver:smpl
To display the version of simplified Chinese language file for mobile portal application (JAVA UI).
When upgrading the firmware
N/A (Display only)
00.01 to 99.99
Display of engine speed type
To display the engine speed type of this machine.
When checking the engine speed type
N/A (Display only)
Display of DADF type
To display the type of the DADF currently installed.
When replacing the DADF
N/A (Display only)
0 to 2
0: Reverse type, 1: 1-path type, 2: Not installed (Copyboard model)
COPIER> OPTION> CUSTOM> SCANTYPE
Dspl of the Reader Controller PCB type
To display the type of the Reader Controller PCB currently installed.
When replacing the Reader Controller PCB
N/A (Display only)
0 to 2
0: Reverse type, 1: 1-path type, 2: Selectable type
According to the setting at shipment
COPIER> OPTION> CUSTOM> SCANTYPE
Display of RCON type
To display the type of RCON which is a system software.
The RCON type differs depending on the types of the Reader Controller PCB and DADF.
When downloading the RCON due to E490 (error due to different model), check the value of this
item.
When E490 (error due to different model) occurs
N/A (Display only)
0 to 1
0: For reverse type, 1: For 1-path type
When downloading the firmware as a set, the RCON type is automatically judged according to the
value of this item.
Display of DADF connection state
To display the connecting state of DADF.
When checking the connection between the machine and DADF
N/A (Display only)
0 to 1
0: Not connected, 1: Connected
610
8. Service Mode