Canon imageRUNNER ADVANCE 4551i Service Manual page 735

COPIER > OPTION > FNC-SW
CDS-FIRM
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
CDS-MEAP
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
CDS-UGW
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
LOCLFIRM
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SDLMTWRN
1 Set to allow firmware update by admin
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit update of the firmware by user (administrator).
When "1: Enabled" is set, Updater can be activated from the user mode.
When allowing the administrator to update the firmware
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not use it for purposes other than collecting log files. In Japan, the firmware cannot be updated
by user. Be sure to return the value to 0 after use.
0 to 1
0: Disabled, 1: Enabled
It differs according to the location.
COPIER> OPTION> FNC-SW> LCDSFLG
CDS: Content Delivery System
1 Set to allow MEAP installation by admin
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit the user (administrator) to install MEAP applications and enable iR options
from CDS.
When 1 is set, Updater can be activated from Settings/Registration menu.
When allowing the administrator to install MEAP applications and enable iR options from CDS
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
1
CDS: Content Delivery System
1 Set to allow firmware update from UGW
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit update of the firmware from the UGW server.
When "1: Enabled" is set, Updater accepts the operation from the UGW server in cooperation with
CDS.
When allowing update of the firmware from the UGW server
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
It differs according to the location.
CDS: Content Delivery System
1 Set to allow firmware update by file
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit the user (administrator) to update the firmware from the remote UI using
a local file.
This update is executed as a measure for vulnerability in emergency situations.
When allowing the administrator to update the firmware using a file
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
1
1 [For customization]
722
8. Service Mode