Canon imageRUNNER ADVANCE 4551i Service Manual page 764

COPIER > OPTION > IMG-SPD
PSP-PR1 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PSP-PR2 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PSP-PR3 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PSP-PR4 2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set productivity/image priority mode
To change the fixing temperature for the paper feed start at the paper size change.
The priority is given as the followings.
- The productivity is priority even if the fixing offset may occur.
- The image quality is priority than the productivity.
Set 1 when the productivity is priority.
Set 2 or 3 when the image quality is priority. When setting 3, the image quality is higher.
Enter the setting value, and then press OK key.
0 to 3
0: OFF
1: Productivity priority
2: Image quality priority
3: Image quality priority (High image)
0
Productivity priority mode: post card
To improve the productivity and to reduce the fixing grade
To improve the productivity and to reduce the fixing grade in printing the post card
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON (Productivity priority)
0
Productivity priority mode: Thick
To improve the productivity and to reduce the fixing grade
To improve the productivity and to reduce the fixing grade in printing the thick paper
Enter the setting value, and then press OK key.
0 to 2
0: OFF (Productivity priority)
1: ON (Fixing grade priority)
2: Auto (Fixing grade priority only in the low humidity environment)
2
Set prdctvty prrty: rotn collation mode
To set the productivity priority in the rotation collation mode by lowering the fixing temperature for
the paper feed start
Enter the setting value, and then press OK key.
0 to 3
0: OFF
1: Productivity priority 1 (fixing temp: -40 deg C)
2: Productivity priority 2 (fixing temp: -60 deg C)
3: Fixing grade priority (fixing temp: -20 deg C)
0
751
8. Service Mode