Canon imageRUNNER ADVANCE 4551i Service Manual page 695

COPIER > ADJUST > FEED-ADJ
LOOP-ENV 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
ADJ-PTMG 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
■ CST-ADJ
COPIER > ADJUST > CST-ADJ
MF-A4R 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Reg loop amnt adj: cst feed of envlp
To adjust the registration loop amount at cassette pickup of envelope.
As the value in changed by 1, the paper feeding distance is increased or decreased by 0.1 mm.
+: The loop amount increases.
-: The loop amount decreases.
When the envelope is skewed at the cassette feeding
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
-128 to 127
mm
0
0.1
Feed timing Adj
To adjust the paper feeding timing according to the feed allowance temperature. (regardless of
the fixing mode)
As the value in changed by 1, the feed allowance temperature is increased or decreased by 3
degrees centigrade.
+: The feed allowance temperature decreases.
-: The feed allowance temperature increases.
Use to shorten the first copy time or the warm up time.
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
0 to 14
0 to 2: +15 deg C
3 to 11: each 3 deg C
12 to 14: -15 deg C
7
Adj of MP Tray A4R paper width
To adjust the width of A4R paper in the Multi-purpose Tray.
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Multi-purpose Tray Paper Width Detection PCB or registering a new value,
execute COPIER> FUNCTION> CST> MF-A4R.
- When replacing the DC Controller PCB/clearing RAM data
- When replacing the Multi-purpose Tray Paper Width Detection PCB or registering a new value
Enter the setting value, and then press OK key.
After the setting value is changed, write the changed value in the service label.
0 to 1024
359
COPIER> FUNCTION> CST> MF-A4R
682
8. Service Mode