Canon imageRUNNER ADVANCE 4551i Service Manual page 947

Hide thumbs Also See for imageRUNNER ADVANCE 4551i:

Table of Contents

■ Installing the Heater PCB

1. Install the Heater PCB.

• 1 Screw (RS Tightening; M3x8) (removed at Step

5 in "Preparation for Host Machine")

2. Connect the disconnected connectors to the Heater

• 4 Connectors

3. Install the Lower Rear Cover.

• 4 Screws (RS Tightening; M3x8)

4. Connect the Connectors. (When the Cassette

Pedestal is installed)

• 3 Connectors

9. Installation

Troubleshooting