Canon imageRUNNER ADVANCE 4551i Service Manual page 748

COPIER > OPTION > NETWORK
IFAX-LIM 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SMTPTXPN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SMTPRXPN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
POP3PN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
FTPTXPN 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
No. of max print lines at IFAX reception
To set the maximum number of lines for e-mail text to be printed when receiving IFAX.
Setting of this item can prevent endless printing of the attached file data in the case of receiving
an error e-mail or failure in interpretation of the context.
Selecting 0 prints the header/footer in 1 sheet when receiving e-mail text without attached file.
When preventing endless print in the case of failure in reception
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 999
0: E-mail text not printed, 999: Unlimited
500
Setting of SMTP TX port number
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set SMTP transmission port number.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
25
Setting of SMTP reception port number
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set SMTP reception port number.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
25
Setting of POP3 reception port number
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set POP3 reception port number.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
110
Specification of SEND port (FTP) number
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To specify address port (FTP) number for SEND.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
21
735
8. Service Mode