26. Remove and discard the commutator seal from the
commutator cover (Fig. 44).
27. Remove the eleven hex socket head screws, that
hold the metering package together (Fig. 45). Use a
3/32 in. allen wrench. Inspect the screws for thread and
socket damage and replace as necessary.
28. Lift the commutator cover from the metering pack
age (Fig. 46).
29. Inspect the ground surfaces of the commutator
cover. You should notice a "normal" polished pattern due
to the rotation of the commutator. If the cover has nicks,
burrs, or scoring, it must be replaced.
®
Reelmaster
223-D/5100-D/5300-D
Page 7 - 29
Figure 44
Figure 45
Figure 46
Repairs